Products

 

Flat Cable

Bridge type OKIFLEX (UL2651)

Bridge type OKIFLEX (UL2651)

This is the most popular type of cable, and can be used for fixed wiring in a wide range of applications. Each core wire is bonded in the longitudinal direction.

Sudare type OKIFLEX (UL2651)

Sudare type OKIFLEX (UL2651)

This flat cable is optimum for fixed wiring inside a complicated console layout. The bonded parts and un-bonded parts of each core wire run in the longitudinal direction continuously at constant intervals (Bonded part: 30mm/Non-bonded part: 70mm; In the case of the 10-color type, Bonded part: 30mm/Un-bonded part: 30mm)

Flexible type 1.0mm pitch OKIFLEX (UL2651)

Flexible type 1.0mm pitch OKIFLEX (UL2651)

This is a 1.0mm pitch flat cable. Flexible material is used as the insulator, making for a very flexible cable. This cable is suitable for a milli-pitch connector. Available in two types, a bridge type and a screen type.

Flexible type OKIFLEX (UL20050)

Flexible type OKIFLEX (UL20050)

This cable uses AWG28 (19/0.08) as the conductor. Each core wire is bonded in the longitudinal direction. Compared to a general flat cable, the number of strands in the conductor has been increased, making for a very flexible cable. Suitable for the wiring of moving parts as well as the wiring of fixed parts.

Twisted pair type OKIFLEX (UL20591)

Twisted pair type OKIFLEX (UL20591)

This is a flat cable which contains twisted pairs. Available in two types: A twisted bonded twin core wire, and two single conductor twisted around each other. The bonded part (flat part) and the un-bonded part (pair wire part) are of acontinuous construction, enabling the cable to be easily formed into rounded or bent fixed wiring.

3-Ampere OKIFLEX (UL2651)

3-Ampere OKIFLEX (UL2651)

This flat cable is optimum for use in drive circuits through which a relatively large current flows. Available in two types, a bridge type and a sudare type

High density (0.635mm pitch) OKIFLEX (UL20028)

High density (0.635mm pitch) OKIFLEX (UL20028)

This is a flat cable that has a pitch of 0.635mm, which is one half of the pitch of a conventional flat cable. Permits miniaturization and high density mounting of equipment. Available in two types, a bridge type and a sudare type.

Eco-OKIFLEX (1.27mm pitch) (UL4539P)

Eco-OKIFLEX (1.27mm pitch) (UL4539P)

The Eco-OKIFLEX uses non-halogen insulation which is kind to the global environment. Like the PVC type, its rated temperature is 105degrees, making it easy to switch over from the PVC type to the Eco type. This cable is available as a bridge type and a sudare type, enabling you to select the optimum type for the job in hand.

High density (0.635mm pitch) Eco-OKIFLEX (UL2734)

High density (0.635mm pitch) Eco-OKIFLEX (UL2734)

This is a non-halogen insulation type Eco-OKIFLEX which is kind to the global environment. It is a high-density type which supports equipment miniaturization. It is available as a bridge type and a sudare type, enabling you to select the optimum type for the job in hand. Rated temperature is 80degrees.

Top of this page

Contact

Contact