Location: Home > Products > Electric Wire and Cable > Multi-core interface cables


Products

Multi-core interface cables

OKIFLEX with sheath (UL20266)

OKIFLEX with sheath (UL20266)

This is a Sudare type OKIFLEX cable which has been rolled into a circular shape and covered with a sheath. A shielded version is also available.

OKIFLEX with S-shaped sheath (UL20266)

OKIFLEX with S-shaped sheath (UL20266)

This is a Sudare type OKIFLEX cable which has been rolled into an S-shape and covered with a sheath. A shielded version is also available.

High density OKIFLEX with sheath (UL20266)

High density OKIFLEX with sheath (UL20266)

This is a high density Sudare type OKIFLEX cable which has been rolled into a circular shape and covered with a sheath. A shielded version is also available.

Cable type OKIFLEX (UL2935, 2384)

Cable type OKIFLEX (UL2935, 2384)

This cable consists of a cluster of twisted twin core wires. Two types,Type I (1.10mm: Standard type) and type II (0.08 mm:Thin type), which have different core diameters, are available. The cable is also available with a shield. The conductors can be identified with dot marks.

EMI OKIFLEX (UL2935,2384)

EMI OKIFLEX (UL2935,2384)

This cable consists of a cable type OKIFLEX with a double shield consisting of aluminum polyester tape and a braid. Two types, EMIFLEX-I (1.10mm:Standard type) and EMIFLEX-II (0.80mm: Thin type), which have different core diameters, are available. The conductors can be identified with dot marks.

High density cable type OKIFLEX (UL20276)

High density cable type OKIFLEX (UL20276)

This is a cable type OKIFLEX with the O.D. of the insulator reduced (0.62mm) in order to reduce the diameter of the cable and meet high density mounting...A shielded version is also available.

Flat shielded type OKIFLEX

Flat shielded type OKIFLEX

This is a shielded flat cable. The outside of a bridge type OKIFLEX is wrapped with aluminum laminate tape and sheathed for noise immunity and minimization of crosstalk. This cable is optimum for fixed wiring which requires EMI countermeasures.

High density pressure welding thin I/O cable (UL20276)

High density pressure welding thin I/O cable (UL20276)

The insulator of this cable has the smallest O.D. (= 0.58mm) of our multi-core cables in order to make the cable thin and permit high density mounting. A shielded version is also available.

Top of this page