FA cables for moving parts
CL-KH series
Overview
This is the movable cable that supports widely from the full configuration to the medium/base configuration.
Features
- Supports moving parts.
Can be used in a wide range of configurations from full configuration to base configuration.
Name
PoCL type: CL -KH - (2) -P - (3) Non-PoCL type: CL -KH - (2) - (3)
(2) : Connector combination symbol(See page 54・55) (3) : Cable length symbol(See page 55)*1
- *1: In the case of PoCL, the cable length must be 10 m or less due to power source restrictions.
Specifications
| Type | PoCL type | Non-PoCL type | |
|---|---|---|---|
| Cable | UL | UL 758 Style 20276 | |
| Rated temp./volt | 80˚C / 30 V | ||
| Jacket material | PVC | ||
| Color | BLack | ||
| Outer diameter | Standard 9.0 mm | ||
| Flame retardant | VW-1 | ||
| Complete product | PoCL | Supported | Not Supported |
| Connector type | MDR or SDR (26-pin) | ||
| Connector color | See Lineup table (page 55) | ||
Performance
| Transmission distance | 10 m (at 66 MHz) |
|---|---|
| Skew [ps/m] | 50 or less |
| Movement performance | Sliding bending: 1 million times or more Bend radius R = 100 mm Speed: 70 times per minute Sliding distance: 350 mm *2 |
- *2: Under Oki test conditions and methods. These values are for reference only and are not guaranteed values.
Usage environment
| Application location | Fixed or moving part |
|---|---|
| Operation temperature range | -20 to 75˚C |
| Minimum bend radius(Recommended value)*3 | Fixed: 40 mm or more Mobile: 100 mm or more |
- *3: The minimum bend radius is the recommended value for stable use.
- Inquiries regarding materials, consultations, and technology
- Inquiry from Web: Inquiry form
