FA cables for moving parts
CL-KS series(UL758 Style 20276)
Overview
This low-skew cable enables high-speed, long-distance transmission for moving parts. Available in medium and base configurations.
Features
- A low-skew cable that enables high-speed and long-distance transmission.
Supports moving parts. Can be used in medium and base configurations.
Name
For PoCL/non-PoCL use : CL -H - (2) -P - (3)
(2) : Connector combination symbol(See page 54・55) (3) : Cable length symbol(See page 55)*1
- *1: In the case of PoCL, the cable length must be 10 m or less due to power source restrictions.
Specifications
| Type | For both PoCL/non-PoCL use | |
|---|---|---|
| Cable | UL | UL 758 Style 20276 |
| Rated temp./volt | 80˚C / 30 V | |
| Jacket material | PVC | |
| Color | BLack | |
| Outer diameter | Standard 9.0 mm | |
| Flame retardant | VW-1 | |
| Complete product | PoCL | Supported |
| Connector type | MDR or SDR (26-pin) | |
| Connector color | See Lineup table (page 55) |
Performance
| Transmission distance(guideline) | 7m (at 85 MHz) |
|---|---|
| Skew [ps/m] | 25 or less |
| Movement performance | Sliding bending: 3 million times or more*2 Bend radius R = 100 mm Speed: 70 times per minute Sliding distance: 300 mm |
Usage environment
| Application location | Fixed or moving part |
|---|---|
| Operation temperature range | -20 to 75˚C |
| Minimum bend radius(Recommended value)*3 | Fixed: 40 mm or more Mobile: 100 mm or more |
- *2: Under Oki test conditions and methods. These values are for reference only and are not guaranteed values.
- *3: The minimum bend radius is the recommended value for stable use.
- Inquiries regarding materials, consultations, and technology
- Inquiry from Web: Inquiry form
