This is the standard product for fixed parts. It supports, regardless of the transmission method, from the full configuration to the medium/base configuration.

• For more details
  

This is the thin type of standard product for fixed parts. It supports the medium configuration and the base configuration.

• For more details
  

This camera link cable is thinner than our conventional product by approximately 1/3 in cross-sectional area.

• For more details
  

This cable is designed for moving parts with a capacity of more than 20 million sliding bending cycles. Available in medium and base configurations.

• For more details
  

This is the movable cable that supports widely from the full configuration to the medium/base configuration.

• For more details
  

This cable corresponds to moving parts. Available in medium and base configurations.

• For more details
  

This low-skew cable enables high-speed, long-distance transmission for moving parts. Available in medium and base configurations.

• For more details
  

This cable is compatible with the Camera Link interface.
We offer an extensive lineup including standard, small-diameter, small-diameter high-sliding, power-supply type, low-skew high-sliding, and Clean Eye Camera Link cables.

• For more details
  

This is the ® Camera Link Cable with high speed circuit board built-into connector that converts electrical signals to optical signals. It provides the maximum transmission-distance of 40m at the full speed of 85 MHz clock.

• For more details
  

This is the cable compatible with PoCL Lite standard. The compact 14 pin SDR connector is used and suitable for connection with ultra compact cameras (Cubic 22 mm).

• For more details
  

This is the movable cable compatible with PoCL Lite standard. The compact 14 pin SDR connector is used and suitable for connection with ultra compact cameras(Cubic 22 mm)

• For more details